(iii) When the LED of your required voltage is lit, release the button and wait for 5 seconds, the flashing LED will stop there, and the voltage of the Output I socket has now been set at your desired voltage and the Power Bank is now ready to supply power at your selected voltage. If you want to change to other voltage setting, you should now press the “ Check / Voltage Selection Button ” again to switch to the output voltage that you require. (ii) The LED of your last voltage setting will start flashing. (i) Press and hold the “ Check / Voltage Selection Button ” for 3 seconds. Follow the steps below to select the desired voltage: There are 3 different outputs of the Output III, i.e., 16V, 19V and 24V. Therefore, whenever you want to fast charge the Power Bank, simply unplug the power cable Z11 from Output Socket I, the AC adaptor will automatically convert to fast charging mode to charge the Power Bank. When the power level of the Power Bank is too low, the Output Socket I will stop charging your device and at the same time the AC adaptor will automatically convert to fast charging the Power Bank.
When the Power Bank is being charged by the AC adaptor and simultaneously providing power to your device through its Output Socket I, the AC adaptor will charge the Power Bank at slow charging mode. If you want to select voltage again, you should unplug the power cable Z11 from Output I socket and repeat the “Voltage Selection” of Output I Socket procedures again (see point 7 below) to re-select your desired voltage.įor use with the sockets Output II & Output III, after connecting the Power Bank to your device, you must press the “ Check / Voltage Selection Button ” once to start charging. (ii) When the Output I is NOT loaded, the LED of the last selected voltage will flash for 12 seconds, and then stop. (i) When the Output I is loaded, the LED of the selected voltage will lit until the power cable Z11 is unplugged from the Output I socket. Also, there will be the following 2 scenarios:
When the power cable Z11 is plugged into Output I socket, the Voltage Selection function will be SUSPENEDED TEMPORARILY. Select the correct output voltage before plugging the cable into the required output socket. With the provided 19V AC adaptor connected for charging the EL1697 Power Bank, it can still be able to power-up 4 devices through its Output I, Output II and Output III ports simultaneously. Please read the following instructions carefully for a good understanding of the product and its operation.
0 kommentar(er)
